Skip to main content

Samsung Galaxy S6 Edge+ SM-G928C TWRP Recovery v2.8.7.1: [ How To Install]




TWRP recovery for Galaxy S6 Edge+ is now a reality and if you are a pro user who thrives on root, custom ROMs and Xposed modules, you’d feel elated to hear that it’s available for Galaxy S6 Edge+.

Custom ROM fix ® provided a download and full guide on how to install Galaxy S6 Edge+ TWRP recovery below.

View my Flipboard Magazine.

 ÷ Supported Devices

•SAMSUNG Galaxy S6 Edge+, model no. SM-G928C

•Don’t try this on other S6 Edge+ variants, like those at T-Mobile, Sprint, AT&T, Verizon, US Cellular, etc. or Canadian S6 Edge+, or any international S6 Edge+ whose model no. is not G928C.

•Don’t try on any other device whatsoever.

•Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files. Sometimes, Odin installation may delete everything on your device.





*Disclaimer:

Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.



÷ How To Install:

Step 1. Download Odin and TWRP recovery file .

Step 2. Install Galaxy S6 Edge+ driver . Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)

Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not visible).

Step 4. Disconnect your Galaxy S6 Edge+ from PC if it is connected.

Step 5. Enable OEM unlock on your device.

Go to Settings > About device. And then tap on build no. 7 times or until your get the message ‘You’re now a developer’.
Go back to Settings, scroll down, and tap on ‘Developer options’.
Look for ‘Enable OEM unlock’ and use its toggle to enable it. Accept the warning by tapping on OK button.

Step 6. Boot Galaxy S6 Edge+ into download mode:

Power off your Galaxy S6 Edge+. Wait 6-7 seconds after screen goes off.
Press and hold the three buttons Power + Home + Volume down together until you see warning screen.
Press Volume Up to continue to download mode.

Step 7. Double click on extract file of Odin, Odin3 v3.10.6.exe, to open the Odin window, Be careful with Odin, and do just as said to prevent problems.

Step 8. Connect your Galaxy S6 Edge+ to PC now using USB cable. Odin should recognize your Galaxy S6 Edge+. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
You can try different USB ports on your PC too, btw.


Step 9. Load the TWRP file into Odin. For this, click the AP button on Odin and the select the file: TWRP-2.8.7.1-Alpha_G928T.tar.md5.


Step 10. Make sure Re-partition checkbox is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.

Step 11. Click the Start button on Odin now to start flashing the firmware on your Galaxy S6 Edge+. Wait till installation is finished, after which your Galaxy S6 Edge+ will reboot automatically. You’ll getPASS message as upon successful installation from Odin.

If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the firmware and flash it again as said above.
If you get FAIL in the top left box, then also you need to flash the firmware again as stated just above.

That’s it. Enjoy the TWRP recovery v2.8.7.1 on your Galaxy S6 Edge+.



Comments

Popular posts from this blog

Install Android 7.1.1 Nougat Emotion ROM on Galaxy Note 4 N910F [ Fast & Stable].

Add to Flipboard Magazine.December 20,2016 by Android Custom ROM Fix

Samsung Galaxy Note 4 N910F Emotion custom ROM comes with tons of new features and is based on Android 7.1.1 Nougat. A quick list of the main features in Emotion is given below and we are sure you’d love to use this on your Galaxy Note 4 N910F:


Based on AOKP
Rom compatible with SM-N910F and SM-N910G
Rom Control
OTA Updates
Fingerprint
DU Navigation Bar
OmniSwitch
PA Pie Control
Statusbar settings
Theme Chooser
Gestures
App Circle Bar
Recents Panel
Cclock Widget
LockScreen settings
Notification Drawer settings
Hardware keys settings
All CM13 feaures
And much more....

View my Flipboard Magazine.

 ÷ Prerequisites:

•This tutorial is only for installing Android 7.1.1 Emotion ROM on Samsung Galaxy Note 4 N910F. Please do not try on any other Galaxy Note 4 variants.

•Your phone should be rooted and have ClockworkMod recovery installed from before.

•This tutorial will wipe out all your data. Proceed at your own risk.

•Perform…

How to Install Official Android 7.1 Nougat CM14.1 Nightly on OnePlus One 3.

Add to Flipboard Magazine.November 18, 2016 by Android Custom ROM Fix™

If you’d like to test the latest Android7.1 on your OnePlus 3 right now in the safest way possible, then the official CM14.1 nightly build from team CyanogenMod is your best bet.




This is an official Release of CM14.1 for OnePlus 3. However, this is a nightly release and doesn’t have all of the CyanogenMod specific functions like CM Theme Manager working yet. You might have to wait a bit more if these functions are important for you.

» OnePlus 3 CM14.1 Build Details:

•Build status: Nightly
•Supported model: OnePlus 3
•Bugs/issues: Not all CyanogenMod specific features are compatible yet.


You Can Find Out How to Apply it Right Now Via This Easy Tutorial .

View my Flipboard Magazine.

÷ Prerequisites:

•This tutorial is only for installing Android 7.0 Nougat CM14.1 Unofficial ROM on OnePlus One A0001.please do not try on any other OnePlus One Variants.

•Your phone should be Rooted & have a Custom Recovery installed i…

Update GALAXY Note 4 - SM-N910F to Marshmallow 6.0.1 July 2016 N910FXXU1DPG2 [Enhanced Features/Security Patch.]

Today Samsung Currently Pushing July  N910FXXU1DPG2 Update to the GALAXY Note4 - SM-N910F on its network (Italy) that includes a security update, as well as now displaying which security patch your phone has and bug fixes. It is recommended you keep your device updated to the latest software so that you don’t experience any flaws or drops in reliability.


N910FXXU1DPG2 is based on the latest Marshmallow 6.0.1 for the Samsung GALAXY Note4 - SM-N910F.

Follow our guide below to download the update and install it yourself.

The Update brings the following changes:

•The security of your device has been improved.
•Device stability improvements, bug fixes.
•New and / or enhanced features.
•Further improvements to performance.

ModelSM-N910FModel nameGALAXY Note4CountryItaly (Vodafone)VersionAndroid 6.0.1Changelist7733605Build dateMon, 04 Jul 2016 05:26:57 +0000Security Patch Level2016-07-01Product codeOMNPDAN910FXXU1DPG2CSCN910FVFR1DPF1


View my Flipboard Magazine.






 *Disclaimer:

Cu…